Forgot password


OSHA Course Schedule

  • VILT | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Mon, April 21, 2025
    • 8:00 AM
    • Thu, April 24, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 28
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Free - Trenching & Excavation

    • Thu, April 24, 2025
    • 8:00 AM - 4:30 PM
    • 2470 Patterson Rd. Unit 14 Grand Junction, CO 81505
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Denver Region - Workers Memorial Day

    • Mon, April 28, 2025
    • 1:00 PM
    • 646 Mariposa St. Denver, CO 80204
    Register

    You are invited to join us for a Workers Memorial Service.

    A solemn and meaningful gathering to honor the lives of those lost to workplace injuries and safety-related incidents. This annual observance serves as a powerful reminder of the critical importance of safe working environments and the lasting impact these tragedies have on families, coworkers, and entire communities.

    Together, we will remember the fallen, reflect on their lives and contributions, and reaffirm our shared commitment to building safer, healthier workplaces for all.

    Let us unite in remembrance and resolve, honoring those we've lost and advocating for a future where every worker returns home safely.

    Show details

  • Spanish - Free - Trenching & Excavation

    • Sat, May 03, 2025
    • 8:00 AM - 4:30 PM
    • 646 Mariposa St. Denver, CO 80204
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #2225 Respiratory Protection

    • Mon, May 05, 2025
    • 8:00 AM
    • Thu, May 08, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 38
    Register

    Course Description: This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program.

    Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements.

    Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment.

    Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.

    Minimum student contact hours: 26

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • VILT | OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

    • Mon, May 05, 2025
    • 8:00 AM
    • Thu, May 08, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 33
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.

    Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts.

    This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Free - Trenching & Excavation

    • Mon, May 12, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry

    • Tue, May 13, 2025
    • 8:00 AM
    • Fri, May 16, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 38
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour general industry safety and health Outreach training program to their employees and other interested groups.

    Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: Students must successfully complete the OSHA #511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Free - Trenching & Excavation

    • Wed, May 14, 2025
    • 8:00 AM - 4:30 PM
    • Billing Hotel & Convention Center 1223 Mullowney Ln. Billings, MT
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • IP | MT - OSHA #7505 Introduction to Incident (Accident) Investigation

    • Thu, May 15, 2025
    • 8:00 AM - 3:30 PM
    • Billings Hotel & Convention Center 1223 Mullowney Ln. Billings, MT
    • 40

    Course Description: This course covers an introduction to basic incident investigation procedures and describes analysis techniques.

    Course topics include reasons for conducting incident investigations, employer responsibilities related to workplace incident investigations, and a four step incident investigation procedure.

    The target audience is the employer, manager, employee or employee representative who is involved in conducting incident and/or near-miss investigations.

    Upon course completion students will have the basic skills necessary to conduct an effective incident investigation at the workplace.

    Minimum student contact hours: 4

    Prerequisites: None

    Show details

  • IP | OSHA #3095 Electrical Standard

    • Mon, May 19, 2025
    • 8:00 AM
    • Thu, May 22, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment.

    Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices.

    Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC).

    Students will participate in workshops on the safe and correct use of electrical testing equipment.

    Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • Free - Trenching & Excavation

    • Fri, May 23, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Free - Trenching & Excavation

    • Thu, May 29, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #502 Update for Construction Industry Outreach Trainers

    • Mon, June 02, 2025
    • 8:00 AM
    • Wed, June 04, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 36
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA Construction Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes

    Minimum student contact hours: 18

    Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry.

    Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Free - Trenching & Excavation

    • Mon, June 02, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #503 Update for General Industry Outreach Trainers

    • Wed, June 04, 2025
    • 8:00 AM
    • Fri, June 06, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 38
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA General Industry Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.

    Minimum student contact hours: 18

    Prerequisites: OSHA #501 Trainer Course in OSHA Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

    Prior to registration, students must provide a copy of their current Outreach trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in OSHA Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Free - Trenching & Excavation

    • Thu, June 12, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Spanish - Free - Trenching & Excavation

    • Sat, June 14, 2025
    • 8:00 AM - 4:30 PM
    • 646 Mariposa St. Denver, CO 80204
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Free - Trenching & Excavation

    • Tue, June 17, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #2045 Machinery and Machine Guarding Standards

    • Mon, June 23, 2025
    • 8:00 AM
    • Thu, June 26, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 38
    Register

    Course Description: This course covers the various types of common machinery, machine safe guards, and related OSHA regulations and procedures.

    Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safe guards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics.

    Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops.

    Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safe guards.

    Minimum student contact hours: 26

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #3095 Electrical Standard

    • Mon, July 07, 2025
    • 8:00 AM
    • Thu, July 10, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment.

    Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices.

    Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC).

    Students will participate in workshops on the safe and correct use of electrical testing equipment.

    Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • VILT | OSHA #510 Occupational Safety and Health Standards for the Construction Industry

    • Tue, July 08, 2025
    • 8:00 AM
    • Fri, July 11, 2025
    • 3:00 PM
    • VILT - (Zoom)
    • 37
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in the construction industry.

    Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous.

    Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • Spanish - Free - Trenching & Excavation

    • Sat, July 12, 2025
    • 8:00 AM - 4:30 PM
    • 646 Mariposa St. Denver, CO 80204
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Free - Trenching & Excavation

    • Mon, July 14, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #2225 Respiratory Protection

    • Tue, July 15, 2025
    • 8:00 AM
    • Fri, July 18, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program.

    Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements.

    Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment.

    Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.

    Minimum student contact hours: 26

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #502 Update for Construction Industry Outreach Trainers

    • Wed, July 16, 2025
    • 8:00 AM
    • Fri, July 18, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 38
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA Construction Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes

    Minimum student contact hours: 18

    Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry.

    Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.



    Show details

  • IP | OSHA #3115 Fall Protection

    • Mon, July 21, 2025
    • 8:00 AM
    • Wed, July 23, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.

    Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program.

    Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

    Minimum student contact hours: 18

    Prerequisites: None

    Show details

  • Free - Trenching & Excavation

    • Fri, July 25, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Free - Trenching & Excavation

    • Wed, July 30, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • Free - Trenching & Excavation

    • Fri, August 01, 2025
    • 8:00 AM - 4:30 PM
    • Denver, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • VILT | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Mon, August 04, 2025
    • 8:00 AM
    • Thu, August 07, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 39
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #2264 Permit-Required Confined Space Entry

    • Tue, August 05, 2025
    • 8:00 AM
    • Thu, August 07, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 39
    Register

    Course Description: This course covers the safety and health hazards associated with permit-required confined space entry in construction and general industry.

    Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements.

    This course features workshops on permit entry classification, instrumentation, and program development.

    Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standards, conduct atmospheric testing, and implement a permit-required confined space program.

    Minimum student contact hours: 20

    Prerequisites: None

    Show details

  • IP | OSHA #3015 Excavation, Trenching, and Soil Mechanics

    • Tue, August 12, 2025
    • 8:00 AM
    • Thu, August 14, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 39
    Register

    Course Description: This course focuses on the operations and safety aspects of excavation and trenching.

    Participants are introduced to practical soil mechanics and its relationship to the stability of shored/unshored slopes and walls.

    Various types of shoring (wood timbers and hydraulic) are explained. Testing methods are demonstrated, allowing students to use instruments such as penetrometers, torvane shears, and engineering rods.

    Upon successful completion of this course, students will have the ability to assess employer safety with the current standard, utilize soil-testing methods to classify soil types, determine protective systems for excavation operations, and determine training requirements.

    Minimum student contact hours: 20

    Prerequisites: None

    Show details

  • IP | OSHA #503 Update for General Industry Outreach Trainers

    • Mon, August 18, 2025
    • 8:00 AM
    • Wed, August 20, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA General Industry Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.

    Minimum student contact hours: 18

    Prerequisites: OSHA #501 Trainer Course in OSHA Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

    Prior to registration, students must provide a copy of their current Outreach trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in OSHA Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.

    Show details

  • Free - Trenching & Excavation

    • Mon, August 18, 2025
    • 8:00 AM - 4:30 PM
    • Durango, CO
    Register


    This material was produced under grant number SH-000128-SH4 from the Occupational Safety and Health Administration, U.S. Department of Labor. It does not necessarily reflect the views or policies of the U.S. Department of Labor, nor does mention of trade names, commercial products, or organizations imply endorsement by the U.S. Government.

    Show details

  • IP | OSHA #2045 Machinery and Machine Guarding Standards

    • Mon, August 18, 2025
    • 8:00 AM
    • Thu, August 21, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers the various types of common machinery, machine safe guards, and related OSHA regulations and procedures.

    Guidance is provided on the hazards associated with various types of machinery and the determination of proper machine safe guards. Course topics include machinery processes, mechanical motions, points of operation, control of hazardous energy sources (lockout/tagout), common OSHA machine guarding violations, and guarding of portable powered tools, conveyors, and robotics.

    Program highlights include the ability to recognize hazards and provide options for control and hazard abatement through machine safeguarding inspection workshops.

    Upon course completion students will have the ability to describe common machine hazards and sources of energy, identify resources for assisting with machine guarding issues, and determine methods of control and hazard abatement, and selection of appropriate machine safe guards.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • IP | OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

    • Tue, August 19, 2025
    • 8:00 AM
    • Fri, August 22, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.

    Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts.

    This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.

    Show details

  • VILT | OSHA #3115 Fall Protection

    • Mon, August 25, 2025
    • 8:00 AM
    • Wed, August 27, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.

    Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program.

    Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

    Minimum student contact hours: 18

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • VILT | OSHA #502 Update for Construction Industry Outreach Trainers

    • Wed, September 03, 2025
    • 8:00 AM
    • Fri, September 05, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA Construction Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes

    Minimum student contact hours: 18

    Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry.

    Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #7515 Job Hazard Analysis Training

    • Fri, September 12, 2025
    • 8:00 AM - 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers OSHA guidelines for developing a Job Hazard Analysis.

    Course topics include the purpose and requirements of a job hazard analysis, the relationship between worker tasks and tools in a work environment, identifying job hazards before they occur, and techniques for completing a job hazard analysis.

    Students will participate in activities about utilizing a job hazard analysis.

    Minimum student contact hours: 7.5

    Prerequisites: None

    Show details

  • IP | OSHA #3085 Principles of Scaffolding

    • Mon, September 15, 2025
    • 8:00 AM
    • Wed, September 17, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course covers the requirements for safe construction and use of scaffolding using OSHA’s construction scaffold standards as a guide.

    Course topics include hazards associated with scaffold design, assembly, disassembly and use, types of scaffolds, determining scaffold capacity, employee qualifications and training and maintenance, repair and inspection requirements.

    Students will participate in workshops to reinforce concepts of safe scaffolding.

    Upon course completion students will have the ability to identify the types of scaffolds and their components, determine safe assembly, use, and disassembly and recognize common violations of OSHA standards.

    Minimum student contact hours: 22

    Prerequisites: None

    Show details

  • VILT | OSHA #3115 Fall Protection

    • Tue, September 16, 2025
    • 8:00 AM
    • Thu, September 18, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.

    Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program.

    Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

    Minimum student contact hours: 18

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • VILT | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Fri, September 19, 2025
    • Fri, October 10, 2025
    • 4 sessions
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #3015 Excavation, Trenching, and Soil Mechanics

    • Tue, September 23, 2025
    • 8:00 AM
    • Thu, September 25, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course focuses on the operations and safety aspects of excavation and trenching.

    Participants are introduced to practical soil mechanics and its relationship to the stability of shored/unshored slopes and walls.

    Various types of shoring (wood timbers and hydraulic) are explained. Testing methods are demonstrated, allowing students to use instruments such as penetrometers, torvane shears, and engineering rods.

    Upon successful completion of this course, students will have the ability to assess employer safety with the current standard, utilize soil-testing methods to classify soil types, determine protective systems for excavation operations, and determine training requirements.

    Minimum student contact hours: 20

    Prerequisites: None

    Show details

  • VILT | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Mon, September 29, 2025
    • 8:00 AM
    • Thu, October 02, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • VILT | OSHA #510 Occupational Safety and Health Standards for the Construction Industry

    • Mon, October 06, 2025
    • 8:00 AM
    • Thu, October 09, 2025
    • 3:00 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in the construction industry.

    Topics include scope and application of the OSHA Construction Standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous.

    Upon course completion students will have the ability to define construction terms found in the OSHA Construction Standards, identify hazards which occur in the construction industry, locate and determine appropriate OSHA Construction Standards, policies, and procedures, and describe the use of the OSHA Construction Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Tue, October 07, 2025
    • 8:00 AM
    • Fri, October 10, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 39
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • IP | OSHA #2255 Principles of Ergonomics

    • Mon, October 13, 2025
    • 8:00 AM
    • Wed, October 15, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers the use of ergonomic principles to recognize, evaluate, and control workplace conditions that cause or contribute to musculoskeletal and nerve disorders.

    Course topics include work physiology, anthropometry, musculoskeletal disorders, use of video display terminals, and risk factors such as vibration, temperature, material handling, repetition, and lifting and patient transfers in health care.

    Course emphasis is on industrial case studies covering analysis and design of work stations and equipment workshops in manual lifting, and coverage of current OSHA compliance policies and guidelines.

    Upon course completion students will have the ability to recognize work-related musculoskeletal and nerve disorders, assess employer’s ergonomic programs, and conduct ergonomic evaluations.

    Minimum student contact hours: 18

    Prerequisites: None

    Show details

  • VILT | OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry

    • Tue, October 14, 2025
    • 8:00 AM
    • Fri, October 17, 2025
    • 3:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour general industry safety and health Outreach training program to their employees and other interested groups.

    Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts. This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: Students must successfully complete the OSHA #511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • VILT | OSHA #503 Update for General Industry Outreach Trainers

    • Tue, October 14, 2025
    • 8:00 AM
    • Thu, October 16, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 39
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA General Industry Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.

    Minimum student contact hours: 18

    Prerequisites: OSHA #501 Trainer Course in OSHA Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

    Prior to registration, students must provide a copy of their current Outreach trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in OSHA Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #2264 Permit-Required Confined Space Entry

    • Tue, October 21, 2025
    • 8:00 AM
    • Thu, October 23, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course covers the safety and health hazards associated with permit-required confined space entry in construction and general industry.

    Course topics include recognition of confined space hazards, identification of permit and non-permit required confined spaces, use of instrumentation to evaluate atmospheric hazards, ventilation techniques, development and implementation of a confined space program, proper signage, and training requirements.

    This course features workshops on permit entry classification, instrumentation, and program development.

    Upon course completion students will have the ability to identify permit and non-permit required confined spaces, reference the OSHA Permit-Required Confined Spaces Standards, conduct atmospheric testing, and implement a permit-required confined space program.

    Minimum student contact hours: 20

    Prerequisites: None

    Show details

  • IP | OSHA #2225 Respiratory Protection

    • Mon, November 03, 2025
    • 8:00 AM
    • Thu, November 06, 2025
    • 3:30 PM
    • 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course covers the requirements for the establishment, maintenance, and monitoring of a respiratory protection program.

    Course topics include terminology, OSHA Respiratory Protection Standards, NIOSH certification, respiratory protection programs, and medical evaluation requirements.

    Program highlights include workshops on respirator selection, qualitative and quantitative fit testing, and the use of respiratory protection and support equipment.

    Upon course completion students will have the ability to identify and describe the elements of a respiratory protection program, the proper selection, use, and inspection of respiratory protection, protection factors, and evaluate compliance with OSHA Standards.

    Minimum student contact hours: 26

    Prerequisites: None



    Show details

  • IP | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Mon, November 03, 2025
    • 8:00 AM
    • Thu, November 06, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • IP | OSHA #503 Update for General Industry Outreach Trainers

    • Wed, November 05, 2025
    • 8:00 AM
    • Fri, November 07, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed course #501 Trainer Course in Occupational Safety and Health Standards for General Industry and who are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA General Industry Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain general industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour General Industry Outreach Training Program classes.

    Minimum student contact hours: 18

    Prerequisites: OSHA #501 Trainer Course in OSHA Standards for General Industry. Authorized Outreach Training Program trainers are required to attend this course once every four (4) years to maintain their trainer status.

    Prior to registration, students must provide a copy of their current Outreach trainer card or an official transcript showing successful completion of the OSHA #501 Trainer Course in OSHA Standards for General Industry from their respective OSHA Training Institute Education Center, for verification of trainer status.

    Show details

  • VILT | OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry

    • Mon, November 10, 2025
    • 8:00 AM
    • Thu, November 13, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 39
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour construction safety and health Outreach Training Program to their employees and other interested groups.

    Using OSHA Construction Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts.

    This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour Construction Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized Outreach trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA Construction Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: Students must successfully complete the OSHA #510 Occupational Safety and Health Standards for Construction and have five (5) years of safety and health work experience in the construction industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA Outreach Training Program trainers are required to attend OSHA #502 Update for Construction Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.


    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #3115 Fall Protection

    • Mon, November 17, 2025
    • 8:00 AM
    • Wed, November 19, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers the OSHA Fall Protection Standard for construction and an overview of fall protection methods.

    Course topics include principles of fall protection, components and limitations of fall arrest systems, and OSHA Standards and policies regarding fall protection. Students will participate in workshops demonstrating the inspection and use of fall protection equipment, residential construction fall protection, training requirements, and developing a fall protection program.

    Upon course completion students will have the ability to assess compliance with the OSHA Fall Protection Standard, evaluate installed passive systems and fall arrest systems, and develop and implement fall protection plans.

    Minimum student contact hours: 18

    Prerequisites: None

    Show details

  • IP | OSHA #502 Update for Construction Industry Outreach Trainers

    • Tue, December 02, 2025
    • 8:00 AM
    • Thu, December 04, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course is designed for Outreach Training Program trainers who have completed OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry and are authorized trainers in the OSHA Outreach Training Program.

    The course provides an update on OSHA Construction Standards, policies, and regulations.

    Upon course completion students will have the ability to demonstrate continued professional development in their field by applying effective adult learning principles and interactive training techniques to clearly identify, define, and explain construction industry hazards and acceptable corrective measures as they continue to teach the 10- and 30-hour Construction Outreach Training Program classes

    Minimum student contact hours: 18

    Prerequisites: OSHA #500 Trainers Course in OSHA Standards for the Construction Industry.

    Authorized Outreach Training Program trainers are required to attend this course once every four years (4) to maintain their trainer status. Prior to registration, students must provide a copy of their current Outreach Training Program trainer card or an official transcript showing successful completion of the OSHA #500 Trainer Course in OSHA Standards for Construction from their respective OSHA Training Institute Education Center, for verification of trainer status.



    Show details

  • IP | OSHA #511 Occupational Safety and Health Standards for General Industry

    • Tue, December 02, 2025
    • 8:00 AM
    • Fri, December 05, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers OSHA Standards, policies, and procedures in general industry.

    Topics include scope and application of the OSHA General Industry Standards, general industry principles and special emphasis on those areas in general industry which are most hazardous.

    Upon course completion students will have the ability to define general industry terms found in the OSHA General Industry Standards, identify hazards which occur in general industry, locate and determine appropriate OSHA General Industry Standards, policies, and procedures, and describe the use of OSHA General Industry Standards and regulations to supplement an ongoing safety and health program.

    Minimum student contact hours: 26

    Prerequisites: None

    Show details

  • IP | OSHA #501 Trainer Course in Occupational Safety and Health Standards

    • Mon, December 08, 2025
    • 8:00 AM
    • Thu, December 11, 2025
    • 3:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course is designed for individuals interested in teaching the 10- and 30-hour general industry safety and health Outreach training program to their employees and other interested groups.

    Using the OSHA General Industry Standards as a guide, special emphasis is placed on those topics required in the 10- and 30-hour programs as well as those which are most hazardous.

    Students are briefed on effective instructional approaches and use of visual aids and handouts.

    This course allows the student to become a trainer in the OSHA Outreach Training Program, to conduct both 10- and 30-hour General Industry Outreach classes, and to issue cards to participants after verifying course completion.

    Students who wish to participate as authorized trainers in the OSHA Outreach Training Program must prepare a presentation on an assigned OSHA General Industry Outreach Training Program topic individually or as part of a group and successfully pass a written exam at the end of the course.

    Minimum student contact hours: 26

    Prerequisites: 

    Students must successfully complete the OSHA #511 Occupational Safety and Health Standards for General Industry and have five (5) years of safety and health work experience in general industry.

    A degree in occupational safety and health, a Certified Safety Professional (CSP) or a Certified Industrial Hygienist (CIH) designation may be substituted for two (2) years of work related experience.

    Students should obtain guidance on whether they meet this requirement from the OSHA Training Institute Education Center where they intend to receive the training.

    Authorized OSHA General Industry Outreach Training Program trainers are required to attend OSHA #503 Update for General Industry Outreach Trainers at least once every four (4) years to maintain their trainer status.



    Show details

  • IP | OSHA #3015 Excavation, Trenching, and Soil Mechanics

    • Mon, December 15, 2025
    • 8:00 AM
    • Wed, December 17, 2025
    • 4:30 PM
    • CEF Training Center 646 Mariposa St. Denver, CO 80204
    • 40
    Register

    Course Description: This course focuses on the operations and safety aspects of excavation and trenching.

    Participants are introduced to practical soil mechanics and its relationship to the stability of shored/unshored slopes and walls.

    Various types of shoring (wood timbers and hydraulic) are explained. Testing methods are demonstrated, allowing students to use instruments such as penetrometers, torvane shears, and engineering rods.

    Upon successful completion of this course, students will have the ability to assess employer safety with the current standard, utilize soil-testing methods to classify soil types, determine protective systems for excavation operations, and determine training requirements.

    Minimum student contact hours: 20

    Prerequisites: None

    Show details

  • VILT | OSHA #3095 Electrical Standards

    • Mon, December 15, 2025
    • 8:00 AM
    • Thu, December 18, 2025
    • 4:30 PM
    • VILT - (Zoom)
    • 40
    Register

    Course Description: This course covers OSHA Electrical Standards and the hazards associated with electrical installations and equipment.

    Course topics include single- and three-phase systems, cord- and plug-connected and fixed equipment, grounding, ground fault circuit interrupters, and safety-related work practices.

    Emphasis is placed on electrical hazard recognition and OSHA Standards, policies, and procedures and applicable portions of the National Electrical Code (NEC). Students will participate in workshops on the safe and correct use of electrical testing equipment.

    Upon course completion students will have the ability to understand the severity of electrical current on the human body, recognize and evaluate actual and potential electrical hazards and reference the applicable OSHA Standard, determine hazard abatement measures, and understand the proper use of electrical testing equipment.

    Minimum student contact hours: 26

    Prerequisites: None

    PLEASE NOTE: 

    This is a Virtual Instructor-Led Training (VILT) for those who reside in the Denver Region (CO, MT, ND, SD, UT, WY). If you reside outside of the Denver Region, you MUST get prior approval from your Region to participate in this course.


    Show details

  • IP | OSHA #7515 Job Hazard Analysis Training

    • Fri, December 19, 2025
    • 8:00 AM - 3:30 PM
    • CEF Training Center 646 Mariposa St Denver, CO 80204
    • 40
    Register

    Course Description: This course covers OSHA guidelines for developing a Job Hazard Analysis.

    Course topics include the purpose and requirements of a job hazard analysis, the relationship between worker tasks and tools in a work environment, identifying job hazards before they occur, and techniques for completing a job hazard analysis.

    Students will participate in activities about utilizing a job hazard analysis.

    Minimum student contact hours: 7.5

    Prerequisites: None

    Show details

Past Courses

Thu, April 17, 2025 Free - Trenching & Excavation
Thu, April 17, 2025 Free - Trenching & Excavation
Tue, April 08, 2025 VILT | OSHA #3115 Fall Protection
Thu, April 03, 2025 Free - Trenching and Excavation
Mon, March 31, 2025 VILT | OSHA #510 Occupational Safety and Health Standards for the Construction Industry
Fri, March 21, 2025 Free - Trenching and Excavation
Tue, March 04, 2025 IP | OSHA #502 Update for Construction Industry Outreach Trainers
Tue, February 25, 2025 IP | OSHA #500 Trainer Course in Occupational Safety and Health Standards for the Construction Industry
Mon, February 24, 2025 VILT | OSHA #501 Trainer Course in Occupational Safety and Health Standards for General Industry
Mon, February 24, 2025 Free - Trenching and Excavation
Mon, February 17, 2025 VILT | OSHA #2264 Permit-Required Confined Space Entry
Wed, February 12, 2025 Free - Trenching and Excavation
Mon, February 03, 2025 Free - Trenching and Excavation
Wed, January 29, 2025 VILT | OSHA #7515 Job Hazard Analysis Train
Mon, January 27, 2025 IP | OSHA #502 Update for Construction Industry Outreach Trainers
Tue, January 21, 2025 IP | OSHA #510 Occupational Safety and Health Standards for the Construction Industry
Mon, January 20, 2025 VILT | OSHA #511 Occupational Safety and Health Standards for General Industry
Thu, January 16, 2025 FREE | VILT | OSHA #7405 - Fall Hazard Awareness for the Construction Industry
Wed, January 15, 2025 VILT | OSHA #7505 Introduction to Incident (Accident) Investigation
Tue, January 14, 2025 VILT | OSHA #3095 | Electrical Standards
Mon, January 13, 2025 IP | OSHA #2055 Cranes in Construction
Wed, January 08, 2025 VILT | OSHA #7845 Recordkeeping Rule Seminar
Mon, January 06, 2025 VILT | OSHA #7500 Introduction to Safety & Health Management

Need a CFR?

Visit the store and purchase a CFR 1926 or CFR 1910.

Upcoming OSHA Courses

Cancellation & Refunds:

Cancellations MUST be done 14 calendar days before the start of out course to be eligible for a full refund.

If cancellation notice falls within 8-13 calendar days, student will be issued a credit of the course fee paid minus 25% administrative fee.

Cancellations within 7 days or no-shows are NOT eligible for a refund, reschedule, or transfer.



Follow Us!